SECOH BLOWERS
Blowers for purification plants
Secoh air pumps are meant to oxygenate small activated sludge plants. Their electromagnetic system allows the two membranes to work with a reduction of energy and noise.
They can be used op to 24 hours per day by installing them in an areated place.
CHOOSE YOUR BLOWER – SHIPPING WORLDWIDE
SECOH ELS 100
Voltage:230V |
Frequency:50Hz |
Power:98 Watt |
Flow: 102 Lt/min |
SECOH ELS 150
Voltage:230V |
Frequency:50Hz |
Power:150 Watt |
Flow: 150 Lt/min |
SECOH TWIN EL 200
Voltage:230V |
Frequency:50Hz |
Power:200 Watt |
Flow:200 Lt/min |
SECOH TWIN EL-250
Voltage:230V |
Frequency:50Hz |
Power:240 Watt |
Flow:240 Lt/min |
INSTALLATION TIPS
Linear diaphragm air pump must be installed above the water high, to avoid the possibility of short circuit.
We suggest the installation of you air pump in a stable base to prevent movements.
Don’t install your pump in a dusty place, because it can block the filter. Make sure if the pump is installed in a ventilated place, in order to help cooling process.
Put your pump safe from direct sunlight, rain and snow. Don’t put your pump near gas and flammable fumes.
Air delivery pipe should be straight, short and bigger than the connection to the pump.
Important: you only have to clean the filter regularly , a simple operation that everybody can do.
SECOH BLOWER EMPLOY
- Wastewater treatment plant
- Septic tank
- Biogas and natural gas plant
- Fish tank and aquarium
- Chemical and pharmaceutical plants
- Medical application
SECOH BLOWER FEATURES
- Energy waste reduction
- Low noise
- Easy maintenance
- Great performance
- No lubrification needed
- Minimum vibration
- Long lasting
SPECIAL KIT AVAILABLE!!! Easy to install, it consists of a blower, correctly shaped air diffusers, connections, pipes and enzymes to make your activated sludge plant work again.